www.etrailer.comVideos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to review part number TH480 from Thule. This is Thules traverse foot pack. And we will also be using fit kit part number THKIT1522. And the cross bars we will be using on this demonstration will be THLB58. Those are sold separately. And we will be taking these parts and will be installing these on a 2003 GMC Sierra extended cab pickup truck. We have our parts here laid out with just one end of the bar so you will not get confused. We will flip the whole assembly over so you can see it easier. We are going to start off with our tower here. To slide it onto the bar, what we are going to have to do is loosen this clamp up. So we pull back on this latch right here. Then we can slide our bar in. We will just leave that loose for now. We are going to pop on our little cap. We are going to need to open up this door here. It just snaps open. And while we are here, we will use this tool to tighten down this screw which actually will clamp it down to the car. Then next we will go ahead and install the fit kit itself. 1:00 It is kind of a good idea to grab this piece of metal, right here. Pull it out a little bit. Make sure the screw is sunk in all of the way. And then our fit kit actually fits in this slot right here. The rubber foot will actually get snapped onto the bottom. And all this does really is just gets pushed into ...
Thursday, October 25, 2012
Thule Traverse Roof-Rack Foot Pack Installation - 2003 GMC Sierra - etrailer.com
Thule Traverse Roof-Rack Foot Pack Installation - 2003 GMC Sierra - etrailer.com Tube. Duration : 3.42 Mins.
www.etrailer.comVideos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to review part number TH480 from Thule. This is Thules traverse foot pack. And we will also be using fit kit part number THKIT1522. And the cross bars we will be using on this demonstration will be THLB58. Those are sold separately. And we will be taking these parts and will be installing these on a 2003 GMC Sierra extended cab pickup truck. We have our parts here laid out with just one end of the bar so you will not get confused. We will flip the whole assembly over so you can see it easier. We are going to start off with our tower here. To slide it onto the bar, what we are going to have to do is loosen this clamp up. So we pull back on this latch right here. Then we can slide our bar in. We will just leave that loose for now. We are going to pop on our little cap. We are going to need to open up this door here. It just snaps open. And while we are here, we will use this tool to tighten down this screw which actually will clamp it down to the car. Then next we will go ahead and install the fit kit itself. 1:00 It is kind of a good idea to grab this piece of metal, right here. Pull it out a little bit. Make sure the screw is sunk in all of the way. And then our fit kit actually fits in this slot right here. The rubber foot will actually get snapped onto the bottom. And all this does really is just gets pushed into ...
www.etrailer.comVideos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to review part number TH480 from Thule. This is Thules traverse foot pack. And we will also be using fit kit part number THKIT1522. And the cross bars we will be using on this demonstration will be THLB58. Those are sold separately. And we will be taking these parts and will be installing these on a 2003 GMC Sierra extended cab pickup truck. We have our parts here laid out with just one end of the bar so you will not get confused. We will flip the whole assembly over so you can see it easier. We are going to start off with our tower here. To slide it onto the bar, what we are going to have to do is loosen this clamp up. So we pull back on this latch right here. Then we can slide our bar in. We will just leave that loose for now. We are going to pop on our little cap. We are going to need to open up this door here. It just snaps open. And while we are here, we will use this tool to tighten down this screw which actually will clamp it down to the car. Then next we will go ahead and install the fit kit itself. 1:00 It is kind of a good idea to grab this piece of metal, right here. Pull it out a little bit. Make sure the screw is sunk in all of the way. And then our fit kit actually fits in this slot right here. The rubber foot will actually get snapped onto the bottom. And all this does really is just gets pushed into ...
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment